|
1. Download the firmware from ATEN website.
2. Turn on the power then use the PON cable connect from your PC to
PN0108’s PON IN port.
3. Slide the Firmware Upgrade switch to the RECOVER position.
4. Its Port LEDs and Station ID LEDs will blink, the Station ID also display the word “UP”.
5. Slide the Firmware Upgrade switch back to the NORMAL position.
6. Its Port LEDs and Station ID LEDs will blink, the Station ID also display the word “01” for ready to upgrade.
7. Run the Firmware Upgrade Package file then follow the step to upgrade it.
8. The PN0108 will restart automatically after they have been successfully upgraded. |
FAQ Search
FAQ View
