ATEN Global Service Site


Subject :
	CE790T no video display

Description :
	The CE790Rs monitor is OK, but the CE790T has no video and displays the error message “Out of Range”

Solution :
	This situation may be caused by an miss reading the monitor's EDID by the CE790T Please try rebooting the CE7990T. If the problem persists please upgrade the CE790's firmware to V2.2.214 or later. To upgrade the firmware check FAQ:1026 or the CE790 manual here: http://www.aten.com/products/KVM/KVM-Extenders/Digital-KVM-Extender~CE790.html Click on the "Resources" tab and then “firmware" Select “Manual” to download the manual. Follow the manual’s instructions to the letter including IP addresses If the issue persists, please click "ask question" below to contact ATEN for assistance.

Related FAQ :
	[PN7212] Safe shutdown doesn't work in Windows 2008
	AV over IP
	CS1716I/1708I-重置用户名和密码失败
	UH3234-可回充多少電流給來源端?
	US3344i and VK1100 RS485 connection


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you