ATEN Global Service Site


Subject :
	Disable power on detect function

Description :
	When the computer with KVM focus is rebooted the KVM switches to the next port

Solution :
	This is caused by the power on detect feature built into the KVM, the feature may be disabled with the following procedure: First upgrade the firmware to newest level, then follow the steps below 1. Press and hold down [Num Lock] 2. Press and release [-] 3. Release [Num Lock] 4. The Caps Lock and Scroll Lock LEDS are flashing. 5. Tap the letter [e] the LEDs stop flashing This is a toggle, if you wish to enable Power on detect repeat the above procedure

Related FAQ :
	US421's FAQ(switching function)
	KN9116's Basic FAQ (Hotkey"F12",ArrayMode,Mouse Cursors issue)
	Resized on Displayport KVMs after switching ports
	CS1208 Default user name and password
	CS1782A/CS1784A Power On Detection


Was this information helpful?		Y N
Any Comment?

Thank you for your valueable comment!!!!

Still need more assistance?