|
Subject : |
|
CS1774 firmware upgrade |
|
Description : |
|
There is no firmware upgrade switch on CS1774. What should I do to enter into firmware upgrade mode? |
|
Solution : |
|
1- Connect the firmware cable between the upgrade computer’s serial port
and the KVM, connect the KVM‘s power adapter
2- Connect a keyboard to the keyboard port on the KVM.
The only three connections to the KVM are power, keyboard, and upgrade cable
3- On the keyboard attached to the KVM:
Press the [Num. Lock] key and hold it down, then press and release
the [-] key release the [Num. Lock] key the NUM Lock and Cap Lock
LEDs should be blinking
4- On the keyboard type [u-p-g-r-a-d-e] then tap the [enter] key
The KVM's port selector LEDs should be flashing
5- On the upgrade computer double click on the firmware upgrade utility you
down loaded from our web site.
6- When the utility opens, highlight on the device listed under [Device List]
7- Then click on [Finish]
Leave it alone – it will tell you when it is done.
|
|
Attachment : |
|
|
|
Related FAQ : |
|
US421's FAQ(switching function)
|
|
KN9116's Basic FAQ (Hotkey"F12",ArrayMode,Mouse Cursors issue)
|
|
How can I list those power off PCs in KN4140v
|
|
KN4140v client viewer force gray mode
|
|
PN0108 schedule function not works
|
|
|