| |
| Subject : |
|
SN0116 Direct HyperTerminal Connection |
| |
| Description : |
|
How do I access the SN0116 via HyperTerminal Connection? |
| |
| Solution : |
|
Please follow the procedures below.
- Installation
Use an Ethernet cable and RJ-45-to-Serial Adapter (ex. SA0141) to connect one of the SN0116 serial ports to a COM port on a PC.
Port 1 on the SN0116 is the default for Console Ports.
- Set up
1. On the PC, run the HyperTerminal application.
2. Set the serial communication parameters to match the SN0116’s default settings:
9600 bps, 8 Data bits, No Parity, No Stop bits.
3. Key in [Ctrl + D] after all confirmations are done and make sure the connection is online.
A login prompt for the SN0116 will appear. Key-in the Username and Password to bring up the SN0116’s main menu.
|
| |
| Related FAQ : |
|
CN8000 Virtual Media Function
|
|
VS201 can support Automatic incoming signal selection
|
|
CS1924 제품과 CS1924M제품의 차이점
|
|
CS62T - 不能使用鼠标切换
|
|
CS62U can't set under 1680X1050
|
| |
|
FAQ Search
FAQ View
