ATEN Global Service Site


Subject :
	SN0108 Direct HyperTerminal Connection

Description :
	How do I access the SN0108 via HyperTerminal Connection?

Solution :
	Please follow the procedures below. - Installation Use an Ethernet cable and RJ-45-to-Serial Adapter (ex. SA0141) to connect one of the SN0108 serial ports to a COM port on a PC. Port 1 on the SN0108 is the default for Console Ports. - Set up 1. On the PC, run the HyperTerminal application. 2. Set the serial communication parameters to match the SN0108’s default settings: 9600 bps, 8 Data bits, No Parity, No Stop bits. 3. Key in [Ctrl + D] after all confirmations are done and make sure the connection is online. A login prompt for the SN0108 will appear. Key-in the Username and Password to bring up the SN0108’s main menu.

Related FAQ :
	RS232 Commands
	CS1762 HDCP 支援度
	KH2508A/KH2516A备份和恢复的问题。
	PE8108 SNMP 트랩 버전
	VE170R / VE170RQ


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you