ATEN Global Service Site


Subject :
	CS1784A firmware upgrade fail

Description :
	CS1784 A firmware is upgraded fail, and it cannot be used anymore. How should I do to let it work?

Solution :
	Please follow the below steps to let your KVM work again! 1. Power off the CS1784A by removing the power jack. 2. Invoke Firmware Upgrade Mode by holding down the Port 1 pushbutton in the front panel and power on the CS1784A. The orange LEDs flash together. 3. Do the firmware upgrade procedure again. If your CS1784A is still not working after upgrading, please contact your local supplier for RMA.

Related FAQ :
	"Initialization Error" is prompted when opening KVM viewer from Linux PC?
	How to add KN to CCVSR 2.0?
	CS62T File Management doesn't auto-start.
	How to use modem and dial up to access KN?
	Winclient is unable to connect to KL9108 under Windows 10


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you