ATEN Global Service Site


Subject :
	CE790 Firmware upgrade procedure

Description :
	How can I do the firmware upgrade for CE790?

Solution :
	1.Download the firmware upgrade package from ATEN official website. 2.Reconfigure your computer's IP address to use the same network as the CE790T/CE790R 3.Use a LAN cable to connect the CE790T/CE790R's LAN port to the LAN port on you computer. 4.Press and hold the OSD pushbutton. 5.While you are holding the OSD pushbutton, plug in the unit's power adapter. 6.Keep holding the OSD pushbutton for a further three seconds. The front panel LEDs flash green alternately to indicate Firmware Upgrade Mode is in effect. 7.Release the OSD pushbutton. 8.Open a web browser and key in the following IP address "http://192.168.168.15/upg.htm"(CE790T); "http://192.168.168.16/upg.htm"(CE790R) 9.Click Browse button to find the firmware upgrade file you have just downloaded, then click Upgrade button. ◎Upgrading the firmware will cost a few minutes, so do not interrupt the process.

Related FAQ :
	Barco製CSE200と組み合わせると階調が崩れる(VP2730)
	CC2000 / 複製檔案時發生錯誤
	CC2000/ Service port
	CS1744 - 相容KVM訊號延伸器
	KA / 支援的機種


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you